Phosphine is essential to protecting stored grain from insect pests and maintaining access to domestic and international markets. Grain Trade Australia (GTA) is working with industry, governments and regulators to ensure that changes to phosphine workplace exposure limits protect workers and can be reliably measured and implemented in practical grain handling and storage operations.
GTA is seeking additional time and a review of the revised limits, while working constructively with Safe Work Australia (SWA) to develop practical industry guidance.
An industry of national importance
A$26 billion industry value in the 2024/25 season.
64.5 million tonnes of grain produced in 2024/25.
42 million tonnes of grain exported in 2024/25.
These figures demonstrate the scale of the industry and its reliance on access to international markets. Safe, effective fumigation is critical to protecting stored grain and meeting customers’ biosecurity and quality requirements.
Source: GTA Annual Report 2024/25. Figures relate to the 2024/25 season, not a forecast for 2026.
GTA has undertaken and coordinated sustained engagement with federal, state, and territory governments and regulators on phosphine workplace exposure limits.
53 letters across 4 rounds of letters to ministers responsible for workplace safety and agriculture in state jurisdictions, alongside correspondence with federal ministers to raise industry concerns and seek a practical implementation pathway.
13 meetings with officials to discuss industry concerns and possible solutions.
3 submissions setting out industry’s position.
4 media releases communicating the issue.
Regulatory developments: Five announcements concerning delayed implementation in Victoria, South Australia, Western Australia, New South Wales and Queensland have been recorded. The details and status of each are outlined below. These are regulatory developments, rather than additional GTA advocacy activities, and do not constitute a national postponement.
Victoria: WorkSafe Victoria confirms that a transition period applies to 15 substances, including phosphine, with the revised workplace exposure limits applying from 1 December 2029. GTA has welcomed this important step and is seeking a nationally consistent approach.
South Australia: The South Australian Government has announced a delay to the commencement of the revised workplace exposure limits for phosphine until 1 July 2028. GTA has welcomed this important first step and is continuing to engage with South Australia and other states and territories.
Western Australia: The Western Australian Government has announced a three-year deferral of the new workplace exposure limit for phosphine, to 1 December 2029. GTA has welcomed the decision, which provides additional time to validate practical measurement methods and develop workable controls. The announcement follows sustained engagement between the Western Australian Government, WorkSafe WA, GTA, CBH Group and the broader grain industry.
New South Wales: The NSW Government announced on 28 October 2026 that the revised phosphine workplace exposure limit will commence on 1 July 2028. SafeWork NSW confirms that the existing phosphine limits of 0.3 ppm TWA and 1 ppm STEL will be maintained until 30 June 2028. GTA has welcomed the extension as a positive step, while continuing to seek a three-year deferral consistent with Victoria and Western Australia to allow practical measurement methods and workable controls to be validated and developed.
Queensland: The Queensland Government has announced a deferral of the revised phosphine workplace exposure limits. Queensland joins Victoria, South Australia, Western Australia and New South Wales in providing additional time before the revised phosphine limits apply.
GTA continues to advocate for a nationally consistent, practical implementation pathway, supported by reliable measurement methods, workable controls and clear industry guidance. Existing workplace health and safety obligations continue to apply.
Industry guidance: GTA is working with Safe Work Australia to develop guidance for the grain industry on managing phosphine exposure. This work is continuing alongside GTA’s advocacy for additional time and a review of the revised limits.
National position: The scheduled national transition date remains 1 December 2026, subject to implementation decisions in each jurisdiction. The announcements in Victoria, South Australia, Western Australia, New South Wales and Queensland should not be interpreted as a national postponement. Businesses should confirm the applicable requirements with their state or territory regulator.
The following links provide official state guidance and information on phosphine exposure limits. Where a dedicated phosphine page was not located, broader workplace exposure or chemical safety guidance is provided and identified below. Existing duties to manage phosphine exposure continue during any transition period.
Victoria
South Australia
Western Australia
Queensland
New South Wales
Tasmania
Links checked: 26 October 2026. Deferral references are included for Victoria, South Australia and Western Australia. The absence of a deferral link for another state is not confirmation of its legal position. Businesses should check current requirements directly with the relevant regulator.
WHS ministers have agreed to replace the workplace exposure standards for airborne contaminants with a revised list of workplace exposure limits (WELs). The national transition period is scheduled to end on 30 November 2026, with the revised limits scheduled to apply from 1 December 2026, subject to jurisdictional arrangements.
For phosphine, the revised limits are:
Workplace exposure limits relate to workers’ exposure to airborne phosphine. They are not fumigation treatment concentrations or grain residue limits.
GTA and its Members are committed to the safety of everyone working in the grain supply chain. Industry’s concern is that the revised phosphine limits, particularly the peak limit, present significant challenges for reliable measurement and practical implementation.
Phosphine is the primary fumigant used across the grain supply chain. There is no equivalent, registered, commercially viable alternative available at the scale required by industry. Changes therefore need to be supported by robust evidence, reliable monitoring methods and practical controls that protect workers while maintaining effective pest management.
GTA is advocating for:
GTA is working with Safe Work Australia to develop practical guidance for the grain industry on managing phosphine exposure.
The objective is to provide clear, usable information that supports businesses in understanding their responsibilities and managing risks in practical workplace conditions.
This guidance work is continuing alongside GTA’s efforts to secure additional time and a review of the revised limits. Participation in developing guidance does not mean that industry’s concerns about measurement, implementation or the limits themselves have been resolved.
Further information will be published here as the guidance work progresses and material becomes available.
GTA is working with the Grains Research and Development Corporation (GRDC), the National Working Party on Grain Protection (NWPGP) and industry participants to address the implications of the revised phosphine limits.
Research, technical input and industry experience are important to establishing reliable measurement methods and a practical implementation pathway. GTA’s work includes addressing the requirements of operations beyond the farm gate, alongside broader grain industry initiatives.
Businesses should continue to manage phosphine as a serious workplace hazard and comply with the requirements currently applicable in their jurisdiction. GTA’s advocacy and the development of guidance do not remove existing WHS obligations.
For further information, contact GTA or subscribe to GTA communications.
For more information or to discuss, please contact Erik Anderson at projects@graintrade.org.au
Stay updated on industry news and events. Subscribe now for exclusive updates and insights!
Self Regulatory Framework
NEWS
Self Regulatory Framework
NWPGP
NEWS
Events
Street Address
Level 7
12 O'Connell Street
Sydney NSW 2000
Postal Address
PO Box R1829
Royal Exchange
Sydney NSW 1225
Street Address
Level 7
12 O'Connell Street
Sydney NSW 2000
Postal Address
PO Box R1829
Royal Exchange
Sydney NSW 1225